Comment:	PLAINVIEW REPEATER 441.975 PL 107.2 146.520MHz
Mic-E message:	Special
Location:	34°10.95' N 101°44.05' W - locator DM94DE13VT - show map 2.5 km West bearing 264° from Plainview, Hale County, Texas, United States [?] 5.2 km Southwest bearing 231° from Seth Ward, Hale County, Texas, United States 68.1 km North bearing 9° from Lubbock, Lubbock County, Texas, United States 115.8 km South bearing 176° from Amarillo, Potter County, Texas, United States
Last position:	2026-02-22 15:11:13 UTC (18h10m ago) 2026-02-22 09:11:13 CST local time at Plainview, United States [?]
Position ambiguous:	Precision reduced at transmitter by 1 digits, position resolution approximately 185.2 m.
Course:	0°
Speed:	0 km/h
Device:	Open Source: APRSdroid (software, Android)
Last path:	WD3NA>3T1PYZ via KC5MVZ-8*,WTX2-2,qAO,WD3NA-2
Positions stored:	7
Other SSIDs:	WD3NA-2 WD3NA-N WD3NA-7

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.