Comment:	W1 Canberra Metro
Last beacon:	UIDIGI 1.9
Location:	35°16.52' S 149°05.86' E - locator QF44NR13RW - show map 2.9 km West bearing 288° from Canberra, Canberra, Australia [?] 6.4 km South bearing 186° from Kaleen, Canberra, Australia 15.1 km Northwest bearing 306° from Queanbeyan, Queanbeyan, New South Wales, Australia
Last position:	2025-12-27 08:16:47 UTC (21m42s ago) 2025-12-27 19:16:47 AEDT local time at Canberra, Australia [?]
Device:	IW3FQG: UIdigi (digi)
Last path:	VK1RBM-1>APNU19 via WIDE2-1,qAR,VK1MIC-1
Positions stored:	3
APRS digipeater – Statistics for 2025-12:
Stations heard directly:	22 on radio path – show map
Last heard a station directly:	2025-12-27 05:18:45 UTC (3h19m ago)
Normal receiver range estimate:	80 km (Updated: 2022-03-31 21:48:56 UTC)
Position packets heard directly:	1552 on radio path

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

Only stations from which a position packet has been heard are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.