Comment:	test SDR for ICOM - APRS MODE
Last status:	test SDR for ICOM software - APRS mode
Location:	51°49.25' N 5°43.79' E - locator JO21UT76NX - show map 1.3 km North bearing 14° from Wijchen, Gemeente Wijchen, Gelderland, Netherlands [?] 4.6 km West bearing 253° from Lindenholt, Gemeente Nijmegen, Gelderland, Netherlands 130.0 km Northwest bearing 320° from Köln (Koeln), Regierungsbezirk Köln, North Rhine-Westphalia, Germany 144.3 km Northeast bearing 41° from Brussels, (Bruxelles-Capitale), Brussels Capital Region, Belgium
Last position:	2025-10-24 20:19:43 UTC (36m57s ago) 2025-10-24 22:19:43 CEST local time at Wijchen, Netherlands [?]
Device:	Marcus Roskosch, DL8MRE: sdr-control (app)
Last path:	PE1NIB-9>APSDR1 via WIDE1-1,WIDE2-1,qAO,PE0F
Positions stored:	54
Other SSIDs:	PE1NIB-10 PE1NIB-1 PE1NIB-7

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.