Station info for N8LRG-9 – aprs.fi

Station info - map view · info · telemetry · weather · raw · status · beacons · messages · bulletins · browse · moving · my account

It is possible to search using wildcards (*?) after a prefix. Example: OH*

Comment:	146.520MHz
Mic-E message:	En route
Last beacon:	4PWB8ERJ-11>ID,qAR,KB8UVN-7:Mansfield 220 node
Location:	40°10.67' N 82°24.97' W - locator EN80TE02BQ - show map 6.9 km Southeast bearing 155° from Utica, Licking County, Ohio, United States [?] 13.4 km North bearing 355° from Newark, Licking County, Ohio, United States 55.1 km Northeast bearing 64° from Columbus, Franklin County, Ohio, United States 125.7 km Southwest bearing 217° from Akron, Summit County, Ohio, United States
Last position:	2025-06-23 16:26:45 UTC (3m38s ago) 2025-06-23 12:26:45 EDT local time at Utica, United States [?]
Altitude:	279 m
Course:	255°
Speed:	74 km/h
Device:	Kenwood: TM-D710 (rig)
Last path:	N8LRG-9>TP1P6W via WIDE1-1,WIDE3-3,qAR,KB8UVN-7 This station is transmitting packets with a configured path of over 3 digipeaters. This causes serious congestion in the APRS network and errors when plotting the station's route on a map. Please consider using a path of WIDE1-1,WIDE2-1 or WIDE2-2, or even WIDE1-1,WIDE2-2 if you are moving very far away from an iGATE.
Positions stored:	19101
Other SSIDs:	N8LRG-B N8LRG

callsign		pkts	first heard - UTC	last heard	longest	(tx => rx)	longest at - UTC

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.