Comment:	146.985MHz T118 -060 FTM-400XDM
Mic-E message:	Off duty
Location:	35°42.55' N 81°53.65' W - locator EM95BR20QE - show map 10.6 km West bearing 258° from Glen Alpine, Burke County, North Carolina, United States [?] 17.8 km West bearing 274° from Salem, Burke County, North Carolina, United States 60.8 km East bearing 78° from Asheville, Buncombe County, North Carolina, United States 109.2 km Northwest bearing 300° from Charlotte, Mecklenburg County, North Carolina, United States
Last position:	2025-05-22 21:34:23 UTC (21h18m ago) 2025-05-22 17:34:23 EDT local time at Glen Alpine, United States [?]
Altitude:	394 m
Position ambiguous:	Precision reduced at transmitter by 1 digits, position resolution approximately 185.2 m.
Course:	0°
Speed:	0 km/h
Device:	Yaesu: FTM-400DR (rig)
Last path:	KG4RVN-9>SUTR5Z via WIDE1-1,WIDE2-1,qAR,KQ4KDX-10
Positions stored:	5446

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.