Mic-E message:	Custom 0
Location:	39°45.36' N 84°03.23' W - locator EM79XS31MK - show map 6.6 km Southeast bearing 114° from Riverside, Montgomery County, Ohio, United States [?] 11.8 km East bearing 92° from Dayton, Montgomery County, Ohio, United States 74.5 km Northeast bearing 28° from Cincinnati, Hamilton County, Ohio, United States 92.8 km West bearing 256° from Columbus, Franklin County, Ohio, United States
Last position:	2025-07-05 04:33:09 UTC (1d 1h23m ago) 2025-07-05 00:33:09 EDT local time at Riverside, United States [?]
Course:	0°
Speed:	0 km/h
Device:	Yaesu: FTM-510D (rig)
Last path:	KF8EMF-9>DJEU3V via WIDE1-1,WIDE2-1,qAO,WC8EMA
Positions stored:	3
Other SSIDs:	KF8EMF-2 KF8EMF-7 KF8EMF KF8EMF-3

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.