Comment:	XASTIR via Raspberry PI
Location:	41°11.50' N 82°03.50' W - locator EN81XE36AA - show map 9.0 km South bearing 182° from Grafton, Lorain County, Ohio, United States [?] 17.3 km West bearing 290° from Medina, Medina County, Ohio, United States 45.7 km Southwest bearing 222° from Cleveland, Cuyahoga County, Ohio, United States 46.8 km West bearing 285° from Akron, Summit County, Ohio, United States
Last position:	2025-11-04 15:18:55 UTC (4h36m ago) 2025-11-04 10:18:55 EST local time at Grafton, United States [?]
Position ambiguous:	Precision reduced at transmitter by 2 digits, position resolution approximately 1.9 km.
Device:	Open Source: Xastir (software, Linux/Unix)
Last path:	KD8HAG-3>APX210 via K8YSE-1*,WIDE2-1,qAR,NV8P-1
Positions stored:	2
Other SSIDs:	KD8HAG-2 KD8HAG-4 KD8HAG

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.