Comment:	X1C3 - Beacon only 3.3V
Location:	44°52.51' N 70°23.00' W - locator FN44TV40AA - show map 6.7 km Northwest bearing 329° from Phillips, Franklin County, Maine, United States [?] 14.8 km Northwest bearing 300° from Strong, Franklin County, Maine, United States 87.1 km North bearing 351° from Lewiston, Androscoggin County, Maine, United States 132.4 km Southeast bearing 116° from Sherbrooke, Estrie, Quebec, Canada
Last position:	2025-05-30 00:24:05 UTC (12h31m ago) 2025-05-29 20:24:05 EDT local time at Phillips, United States [?]
Altitude:	61 m
Course:	194°
Speed:	0 km/h
Device:	Open Source: Xastir (software, Linux/Unix)
Last path:	KC1VBS-1>APX1C3 via WIDE1-1,WIDE2-1,qAR,KC1VBS
Positions stored:	729
Other SSIDs:	KC1VBS KC1VBS-9 KC1VBS-7 KC1VBS-2 KC1VBS-5 KC1VBS-4 KC1VBS-4 KC1VBS-i KC1VBS-10 KC1VBS-5 KC1VBS-4 KC1VBS-9 KC1VBS-i KC1VBS-i

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.