Last status:	https://github.com/richonguzman/LoRa_APRS_Tracker 2025.03.28
Location:	45°07.67' N 10°11.09' E - locator JN55CD20EQ - show map 286.8 m South bearing 202° from Pieve San Giacomo, Provincia di Cremona, Lombardy, Italy [?] 3.0 km Northeast bearing 45° from Sospiro, Provincia di Cremona, Lombardy, Italy 86.3 km Southeast bearing 115° from Milan, Province of Milan, Lombardy, Italy 127.2 km Northeast bearing 50° from Genova, Province of Genoa, Liguria, Italy
Last position:	2025-07-10 18:42:56 UTC (5d 17h3m ago) 2025-07-10 20:42:56 CEST local time at Pieve San Giacomo, Italy [?]
Altitude:	112 m
Device:	Ricardo, CA2RXU: ESP32 LoRa Tracker (tracker)
Last path:	IK2MMR-7>APLRT1 via WIDE1-1,qAO,IK2MMR-10
Positions stored:	123
Other SSIDs:	IK2MMR-10 IK2MMR-15 IK2MMR-13 IK2MMR-11 IK2MMR-12 IK2MMR-8 IK2MMR-9 ik2mmr

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.