Comment:	Joe, LoRa APRS Lilygo by car Bat=3.87V (69%)
Location:	47°06.37' N 8°11.84' E - locator JN47CC35QL - show map 2.9 km South bearing 175° from Sempach, Amt Sursee, Lucerne, Switzerland [?] 5.4 km Southwest bearing 204° from Hildisrieden, Amt Sursee, Lucerne, Switzerland 39.3 km Southwest bearing 223° from Zürich, Bezirk Zürich, Zurich, Switzerland 102.2 km South bearing 165° from Freiburg, Regierungsbezirk Freiburg, Baden-Württemberg, Germany
Last position:	2025-11-15 21:55:33 UTC (5d 18h33m ago) 2025-11-15 22:55:33 CET local time at Sempach, Switzerland [?]
Altitude:	582 m
Device:	Ricardo, CA2RXU: ESP32 LoRa Tracker (tracker)
Last path:	HB9FWX-9>APLRT1 via WIDE1-1,qAO,HB9LU-13
Positions stored:	4
Other SSIDs:	HB9FWX-7

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.