Comment:	RaspberryPI Flarm and APRS RX
Last status:	Raspberry Pi 3 mit RTL Stick core_temp=31.5'C
Location:	51°58.86' N 9°50.52' E - locator JO41WX15AK - show map 1.5 km East bearing 102° from Alfeld, Lower Saxony, Germany [?] 5.2 km Northeast bearing 31° from Delligsen, Lower Saxony, Germany 43.9 km South bearing 170° from Hannover, Lower Saxony, Germany 89.7 km East bearing 93° from Bielefeld, Regierungsbezirk Detmold, North Rhine-Westphalia, Germany
Last position:	2023-11-25 19:11:07 UTC (5d 2h20m ago) 2023-11-25 20:11:07 CET local time at Alfeld, Germany [?]
Device:	DL1MX: rtl-sdr Python iGate (software)
Last path:	DO6GZ-10>APPM13 via TCPIP*,qAC,T2ALFELD
Positions stored:	12458
Other SSIDs:	DO6GZ-13 DO6GZ-6 DO6GZ-L4 DO6GZ-11 DO6GZ-L2 DO6GZ-2 DO6GZ-14 DO6GZ-15 DO6GZ-7 DO6GZ-12 DO6GZ-L3 DO6GZ DO6GZ-8 DO6GZ-WX DO6GZ-1 DO6GZ-9 DO6GZ-4 DO6GZ-3 DO6GZ-L8

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.