Comment:	DL2ECC LoRa APRS
Last status:	https://github.com/richonguzman/LoRa_APRS_iGate 2025-06-20
Location:	51°00.15' N 6°32.58' E - locator JO31GA50DO - show map 10.2 km South bearing 196° from Grevenbroich, Regierungsbezirk Düsseldorf, North Rhine-Westphalia, Germany [?] 11.2 km South bearing 164° from Jüchen, Regierungsbezirk Düsseldorf, North Rhine-Westphalia, Germany 29.5 km West bearing 285° from Köln (Koeln), Regierungsbezirk Köln, North Rhine-Westphalia, Germany 59.7 km Southwest bearing 214° from Essen, North Rhine-Westphalia, Germany
Last position:	2025-07-14 17:45:07 UTC (2d 20h21m ago) 2025-07-14 19:45:07 CEST local time at Grevenbroich, Germany [?]
Device:	Ricardo, CA2RXU: ESP32 LoRa iGate (igate)
Last path:	DL2ECC-30>APLRG1 via TCPIP*,qAC,T2SYDNEY
Positions stored:	1
Other SSIDs:	DL2ECC-15 DL2ECC-14 DL2ECC-7

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.