Last status:	https://github.com/richonguzman/LoRa_APRS_Tracker 2025-08-11
Location:	52°28.26' N 8°00.48' E - locator JO42AL03XB - show map 8.1 km North bearing 12° from Bramsche, Lower Saxony, Germany [?] 13.5 km North bearing 358° from Wallenhorst, Lower Saxony, Germany 112.7 km North bearing 20° from Dortmund, North Rhine-Westphalia, Germany 132.2 km Northeast bearing 31° from Essen, North Rhine-Westphalia, Germany
Last position:	2025-11-14 14:32:33 UTC (11d 14h23m ago) 2025-11-14 15:32:33 CET local time at Bramsche, Germany [?]
Altitude:	0 m
Device:	Ricardo, CA2RXU: ESP32 LoRa Tracker (tracker)
Last path:	DL0GAS-7>APLRT1 via WIDE1-1,qAO,DB0DAM-12
Positions stored:	6
Other SSIDs:	DL0GAS-11 DL0GAS-10 DL0GAS-6 DL0GAS-1 DL0GAS-17 DL0GAS-4 DL0GAS-8 DL0GAS-5 DL0GAS-2 DL0GAS-3

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.