Comment:	Jorge, QAP via www.RedChile.org Bat=2.89V ( 0%)
Last status:	https://github.com/richonguzman/LoRa_APRS_Tracker 2024.08.16
Location:	33°25.63' S 70°44.21' W - locator FF46PN17NL - show map 2.2 km Northwest bearing 331° from Lo Prado, Provincia de Santiago, Metropolitana, Chile [?] 8.9 km West bearing 292° from Santiago, Provincia de Santiago, Metropolitana, Chile 25.4 km Northwest bearing 326° from Puente Alto, Provincia de Cordillera, Metropolitana, Chile
Last position:	2025-10-22 07:07:08 UTC (3d 19h15m ago) 2025-10-22 04:07:08 -03 local time at Lo Prado, Chile [?]
Altitude:	487 m
Device:	Ricardo, CA2RXU: ESP32 LoRa Tracker (tracker)
Last path:	CE3PPY-7>APLRT1 via WIDE1-1,qAR,CE3PPY-10
Positions stored:	26784
Other SSIDs:	CE3PPY-10 CE3PPY-N CE3PPY-9

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.