Comment:	73. IGATE2 Good luck
Last beacon:	Using IGate2
Location:	30°38.17' N 111°22.36' E - locator OM50QP42RQ - show map 2.7 km Southeast bearing 115° from Wujia, Hubei, China [?] 2.9 km Northeast bearing 61° from Aijia, Hubei, China 12.1 km Southeast bearing 136° from Yichang, Hubei, China 91.2 km Northwest bearing 294° from Shashi, Hubei, China
Last position:	2025-02-06 08:15:32 UTC (4d 4h19m ago) 2025-02-06 16:15:32 CST local time at Wujia, China [?]
Position ambiguous:	Precision reduced at transmitter by 1 digits, position resolution approximately 185.0 m.
Last path:	BG6UFZ>BEACON via TCPIP*,qAC,FIFTH
Positions stored:	7
Other SSIDs:	BG6UFZ-10 BG6UFZ-6 BG6UFZ-15 BG6UFZ-7 BG6UFZ-B BG6UFZ-5 BG6UFZ-9 BG6UFZ-1 BG6UFZ-3 BG6UFZ-C
APRS igate – Statistics for 2025-02:
Stations heard directly:	2 on radio path – show map
Last heard a station directly:	2025-02-06 06:09:48 UTC (4d 6h25m ago)
Position packets heard directly:	8 on radio path
Position packets sent to APRS-IS:	9 – show map

Only stations from which a position packet has been heard are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.