Comment:	Eastside iGate TX/RX
Location:	43°05.89' N 89°15.88' W - locator EN53IC83FN - show map 9.6 km East bearing 103° from Maple Bluff, Dane County, Wisconsin, United States [?] 10.4 km Southwest bearing 204° from Sun Prairie, Dane County, Wisconsin, United States 11.4 km East bearing 76° from Madison, Dane County, Wisconsin, United States 110.5 km West bearing 274° from Milwaukee, Milwaukee County, Wisconsin, United States
Last position:	2026-02-09 03:22:03 UTC (14d 5h40m ago) 2026-02-08 21:22:03 CST local time at Maple Bluff, United States [?]
Device:	WB2OSZ: DireWolf
Last path:	K9CE-10>APDW18 via qAR,K9CE-10
Positions stored:	1
Other SSIDs:	K9CE-B K9CE-7 K9CE-5 K9CE-i K9CE
APRS igate – Statistics for 2026-02:
Stations heard directly:	3 on radio path – show map
Last heard a station directly:	2026-02-09 03:21:16 UTC (14d 5h41m ago)
Position packets heard directly:	29 on radio path
Position packets sent to APRS-IS:	29 – show map

Only stations from which a position packet has been heard are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.