Comment:	iGate using Direwolf on a Raspberry Pi
Location:	37°53.79' S 145°14.43' E - locator QF22OC84UU - show map 5.0 km West bearing 255° from Ferntree Gully, Knox, Victoria, Australia [?] 13.1 km Southwest bearing 227° from Montrose, Yarra Ranges, Victoria, Australia 26.0 km East bearing 111° from Melbourne, Melbourne, Victoria, Australia 81.9 km East bearing 70° from Geelong, Greater Geelong, Victoria, Australia
Last position:	2025-06-29 21:46:43 UTC (7m23s ago) 2025-06-30 07:46:43 AEST local time at Ferntree Gully, Australia [?]
Device:	WB2OSZ: DireWolf
Last path:	VK3AH-1>APDW17 via TCPIP*,qAC,T2TAS
Positions stored:	8
APRS igate – Statistics for 2025-06:
Stations heard directly:	24 on radio path – show map
Last heard a station directly:	2025-06-29 20:56:01 UTC (58m5s ago)
Normal receiver range estimate:	80 km (Updated: 2025-05-31 22:59:54 UTC)
Position packets heard directly:	1990 on radio path
Position packets sent to APRS-IS:	2663 – show map

Only stations from which a position packet has been heard are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.