Comment:	Clacton's 24/7 APRS Digipeater JO01nt
Location:	51°48.22' N 1°08.86' E - locator JO01NT72RV - show map 1.7 km North bearing 340° from Clacton-on-Sea, Essex, England, United Kingdom [?] 4.4 km East bearing 85° from Saint Osyth, Essex, England, United Kingdom 91.4 km East bearing 69° from City of London, Greater London, England, United Kingdom 93.7 km East bearing 69° from London, Greater London, England, United Kingdom
Last position:	2025-06-06 10:56:28 UTC (5m33s ago) 2025-06-06 11:56:28 BST local time at Clacton-on-Sea, United Kingdom [?]
Device:	Microsat: PLXDigi
Last path:	MB7UCL>APMI03 via WIDE2-2,qAR,MB7UAI
Positions stored:	1
APRS digipeater – Statistics for 2025-06:
Stations heard directly:	10 on radio path – show map
Last heard a station directly:	2025-06-06 10:56:36 UTC (5m25s ago)
Normal receiver range estimate:	3500 km (Updated: 2025-03-31 22:17:33 UTC)
Position packets heard directly:	897 on radio path

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

Only stations from which a position packet has been heard are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.