Station info for LX0APN-2 – aprs.fi

Station info - map view · info · telemetry · weather · raw · status · beacons · messages · bulletins · browse · moving · my account

It is possible to search using wildcards (*?) after a prefix. Example: OH*

Comment:

PLXDigi U=13.7V.

Last status:

www.rlx.lu Radioamateurs du Luxembourg

Location:

49°56.65' N 5°58.06' E - locator JN29XW66CO - show map
3.8 km Southeast bearing 137° from Wiltz, Canton de Wiltz, Diekirch, Luxembourg [?]
11.4 km Northwest bearing 330° from Niederfeulen, Canton de Diekirch, Diekirch, Luxembourg
130.1 km Southwest bearing 213° from Köln (Koeln), Regierungsbezirk Köln, North Rhine-Westphalia, Germany
152.6 km Southeast bearing 131° from Brussels, (Bruxelles-Capitale), Brussels Capital Region, Belgium

Last position:

2026-03-01 13:48:09 UTC (11m15s ago)
2026-03-01 14:48:09 CET local time at Wiltz, Luxembourg [?]

Device:

Microsat: PLXDigi

Last path:

LX0APN-2>APMI03 via WIDE2-2,qAR,LX0APR-2 (good)

Positions stored:

Other SSIDs:

LX0APN-4

APRS digipeater – Statistics for 2026-03:

Stations heard directly:

1 on radio path – show map

Last heard a station directly:

2026-03-01 13:47:38 UTC (11m46s ago)

Normal receiver range estimate:

150 km (Updated: 2025-05-31 22:25:22 UTC)

Position packets heard directly:

23 on radio path

Bulletins:

BLNALUX:	XLX270 Reflector https://xlx270.epf.lu/	(55s ago)
BLNYLUX:	XLX270 Reflecwor https://xlx270.epf.tu/	(1d 14h3m ago)

callsign		pkts	first heard - UTC	last heard	longest	(tx => rx)	longest at - UTC

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

callsign		pkts	first heard - UTC	last heard	longest	(rx => tx)	longest at - UTC

Only stations from which a position packet has been heard are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.